★ Save $250 on orders over $2,500 · free on-site inspectionCSLB Lic# 1058008 · Licensed, Bonded & Insured · (855) 566-5340

Blown-In Insulation Cost: 2026 Prices Per Square Foot

What blown-in insulation costs per square foot and per attic, what moves the price, the R-values to aim for, and how to read a Bay Area estimate.

Insulation GuidesBy USA Spray Me12 min read
Blown-In Insulation Cost: 2026 Prices Per Square Foot

Blown-in insulation typically costs between about $1 and $3.50 per square foot installed, and our published Bay Area range for blow-in work is $1.20 to $3.50 per square foot. A 1,000-square-foot attic therefore lands between $1,200 and $3,500 on our range, with the final number set by the insulation material, the R-value you need, how easy the space is to reach, and whether old insulation has to come out first. The sections below show how to read those variables so you can compare quotes on equal terms.

Usasprayme
Explore Insulation Options
See how USA Spray Me’s spray foam insulation and waterproofing solutions address air leaks and dampness in Bay Area properties.

TL;DR

  • Our published price for blow-in insulation is $1.20 to $3.50 per square foot, billed per completed project. Removal of old insulation is priced separately at $1 to $2 per square foot.
  • National guides put the average blown-in job at about $1,725, with a typical range of $750 to $3,800.
  • Material, target R-value, access, old insulation and air sealing explain most of the gap between two quotes.
  • The federal insulation tax credit covered work installed through December 31, 2025, so 2026 installs should be budgeted without it.
  • Compare estimates on the same R-value, the same square footage and the same scope, not on the bottom line alone.

Table of Contents

What blown-in insulation costs in 2026

Blown-in (also called loose-fill) insulation is shredded fiberglass, cellulose or mineral wool blown through a hose into an attic floor or a wall cavity. Because it fills gaps and settles around obstructions, it is a common upgrade for homes with thin or uneven insulation.

Prices come in two forms: a total for the job and a rate per square foot. Here is how the numbers line up.

Source Figure What it covers
Forbes Home $750 to $3,800, average $1,725 Average homeowner, about 750 sq ft of attic
The Spruce Average $1,725, range $750 to $3,800 Whole project
The Spruce $0.50 to $2.30 per sq ft Materials only
The Spruce $1.75 to $3.50 per sq ft Walls in an existing home
USA Spray Me $1.20 to $3.50 per sq ft Blow-in insulation, per completed project

Labor is a large part of the total. Both national guides put professional labor at roughly $40 to $70 per hour. Forbes puts it at about $1 per square foot for attics and $1.50 per square foot for walls.

National figures move with material prices and labor rates, and guides publish them for a given year. Treat any single number as a starting range, then get a written quote for your own square footage.

What blown-in insulation costs in 2026

A worked example

Take a 1,000-square-foot attic. At our published range of $1.20 to $3.50 per square foot, the project falls between $1,200 and $3,500. The low end fits an open, easy-to-reach attic that needs a modest top-up. The high end fits a deeper R-value target, tricky access or added preparation.

If you are comparing against the national average of $1,725 for 750 square feet, divide it out: that is about $2.30 per square foot, which sits inside the same band.

Cost per square foot by situation

The same hose and the same insulation produce different prices depending on where the material goes.

  • Open attic floor. Gravity helps. Material piles to the depth you need across an unobstructed floor, which is the least labor-intensive version of the job.
  • Closed walls. Installers drill access holes, blow the cavity to a dense pack so it does not settle, then plug and patch every hole. That is why wall work costs more per square foot than attic work, a point HomeEnergyDecisions explains in its cost breakdown.
  • Top-up over existing insulation. Adding depth to a partly insulated attic uses less material and usually costs less than starting from bare joists.
  • Removal first. If old or damaged insulation has to come out, that is a separate line. Our insulation removal is priced at $1 to $2 per square foot, and you can read about it on our insulation removal page.

For context on older benchmarks, the U.S. Department of Energy’s Guide to Home Insulation listed loose-fill insulation at $0.45 to $1.35 per square foot for R-30 and $0.75 to $2.25 for R-50, professionally installed. That guide dates from 2010, so use it for the shape of the pricing (higher R-value costs more per square foot) and not for today’s dollars.

What moves the price of a blown-in job

Five variables explain most of the spread between quotes.

Material

Fiberglass is generally the lowest-cost loose-fill option, cellulose sits in the middle, and mineral wool costs the most. We install both fiberglass and blow-in insulation, and our fiberglass page lists a range of $0.50 to $2.50 per square foot. If you are weighing blown-in against a different material, our comparisons of spray foam against cellulose and spray foam against fiberglass put the cost and R-values side by side.

Target R-value

R-value measures resistance to heat flow, and a higher number means better insulation. A higher target needs more depth, which means more material and more time. The next section shows what to aim for.

Size and access

Larger attics cost more in total, though the per-square-foot rate can fall on big, uncomplicated jobs because setup and travel are spread over more area. Tight crawl spaces, low rooflines, a narrow hatch or cluttered storage all add labor. According to The Spruce, which quotes an insulation professional, a typical attic takes about a day, and the common obstacles are inadequate access, poor ventilation and improperly sealed attics. Clearing those before the crew arrives keeps the day short.

Old insulation and air sealing

Damaged or contaminated insulation has to be removed before new material goes in, and air sealing (closing the gaps where conditioned air escapes into the attic) is usually quoted as its own line. Sealing first matters: CraftedCalcs estimates that sealing before insulating recovers 15 to 30 percent of effective performance. In California, the work also has to meet energy code, and our guide to air sealing and insulation for Title 24 explains how the two fit together.

The home itself

Older houses often have more than one leak path. Original windows and trim in a period home, for example, can lose as much comfort as a thin attic, and guidance on restoring historic windows for efficiency shows how owners handle that side of the envelope without replacing original features. We handle the building envelope with in-house crews, so insulation, air sealing and related work can be scoped together.

How thick should blown-in attic insulation be?

Depth is the reason a quote has a price at all, so it helps to know the target before you read one. ENERGY STAR recommends these attic R-values by climate zone:

Climate zone Uninsulated attic Attic with 3 to 4 inches already
Zone 1 R-30 R-25
Zones 2 and 3 R-49 R-38
Zones 4 to 8 R-60 R-49

Check which zone your county falls in on the ENERGY STAR page before you set a target.

R-49 translates to roughly 13.7 inches of settled blown cellulose or 17 to 18.25 inches of blown fiberglass, according to The Roofing Brief. Cellulose settles by about 10 percent, so installers blow it deeper than the final figure and check it against the minimum settled thickness on the bag label. Blown fiberglass barely settles. The same article notes that the 2021 International Residential Code calls for depth markers stapled to the joists, so you can confirm the finished depth yourself.

That is also a quick quote check. A bid that names the R-value, the material and the installed depth is a bid you can hold the finished work against.

What to look for in a blown-in insulation estimate

Two quotes with a $900 gap are rarely quoting the same job. Line them up on these points.

  1. Square footage. Both quotes should state the area being insulated. A different number of square feet changes the total without changing the rate.
  2. Target R-value and depth. One quote for R-38 and another for R-49 are not comparable.
  3. Material. Fiberglass, cellulose and mineral wool carry different prices and different depths for the same R-value.
  4. Removal. Is old insulation coming out, and is that a separate line?
  5. Air sealing and baffles. Sealing leaks and installing baffles at the eaves, which keep insulation from blocking ventilation, should be named, not implied.
  6. Access and prep. Hatch size, height, stored items and any required repairs should be visible.
  7. Warranty. Look for a workmanship warranty and who stands behind it.
  8. Licensing. In California, the contractor should hold the appropriate license, and crews should work to current building and energy code.

Our approach is built around that kind of clarity: transparent pricing, no upselling, and honest recommendations about when a less expensive option will do the job. Our crews are certified and licensed in California, and every job comes with a workmanship warranty.

Is there a tax credit for insulation?

The federal energy-efficiency credit for insulation applied to work installed through December 31, 2025. Under the 2025 instructions for IRS Form 5695, it covered 30 percent of the cost of qualifying insulation or air-sealing materials, up to $1,200, with labor excluded. For a project installed in 2026, plan your budget without that credit, and confirm the current status on the IRS site or with a tax professional before you file.

If you installed insulation in 2025, the credit can still be claimed on your 2025 return with Form 5695. Keep the itemized invoice, since the credit applies to materials and not labor.

On the state side, programs and utility rebates change, so check the current offers from your utility and your county before signing a contract.

When blown-in is the right choice, and when to look at spray foam

Blown-in is a strong fit for open attic floors that need depth, and for filling wall cavities in existing homes. When the problem is air leakage, moisture or a conditioned attic with insulation at the roof deck, a sprayed material may serve you better because it seals as it insulates. Our spray foam pages list $1.00 to $2.50 per board foot for spray foam insulation and $1.50 to $2.50 per board foot for closed-cell insulation. A board foot is one square foot of material one inch thick, so it is not the same unit as the per-square-foot rate for blown-in. Always convert to the same R-value and area before comparing.

Our side-by-side guide to spray foam and blown-in cost and R-values walks through that conversion, and our Bay Area attic insulation cost guide applies it to local homes. If you are deciding whether the attic is due for work at all, see when, what and how much for an attic upgrade.

When blown-in is the right choice, and when to look at spray foam

Who this matters to beyond homeowners

Property managers and business owners price blown-in work the same way, with more attention to schedule and scope. A multi-unit building or a commercial roof space brings larger square footage, which can lower the per-square-foot rate, and it calls for a written scope covering access, working hours and code requirements. Our commercial insulation services cover those projects, and contractors who need a specialist crew for part of a build can bring us in for the insulation scope.

Our view on pricing blown-in insulation

We price insulation by the finished job, and we think a quote should be readable by the person paying it. That means the square footage, the material, the R-value and the depth are written down, and every extra, such as removal or air sealing, is its own line.

Our rule is to recommend what a building needs and nothing more. If a top-up of blown-in insulation brings an attic to the right R-value, that is what we recommend, because it is the less expensive option that does the work. If a space needs air sealing or a different material to solve the actual problem, we say so and show why.

The attic is only one part of the building envelope. Because our in-house crews handle insulation, air sealing and related work, the scope can be planned as one project that meets California energy and building codes and carries a workmanship warranty.

USA

Get a blown-in insulation quote in the Bay Area

We install blown-in insulation for homes, businesses and managed properties across the San Francisco Bay Area, at a published $1.20 to $3.50 per square foot, billed per completed project. Our certified, California-licensed crews work to state energy and building codes, and the work is backed by a workmanship warranty. See the details on our blown-in insulation page, or browse everything else we do on our services page.

Usasprayme

If you already have a quote in hand, bring the R-value, the square footage and the material to us and we will help you read it line by line.

FAQ

How much does it cost to have blown insulation done?

National guides put the average blown-in project at about $1,725, with most jobs between $750 and $3,800. Our own published Bay Area range is $1.20 to $3.50 per square foot, so a 1,000-square-foot attic runs $1,200 to $3,500. Your total depends on the material, the target R-value, access and any removal or air sealing.

What is the blown insulation cost per square foot?

Expect roughly $1 to $3.50 per square foot installed, depending on the source and the scope. Labor alone runs about $1 per square foot for attics and $1.50 for walls, according to Forbes Home. Walls cost more than attics because the installer has to drill, dense-pack and patch each cavity.

How thick should blown-in insulation be in an attic?

It depends on your climate zone. ENERGY STAR recommends R-49 for an uninsulated attic in Zones 2 and 3, which is roughly 13.7 inches of settled cellulose or 17 to 18.25 inches of fiberglass. Ask for the R-value and the installed depth in writing.

Is there a tax credit for blown-in insulation?

The federal credit covered qualifying insulation materials installed through December 31, 2025, at 30 percent up to $1,200, with labor excluded. Work installed in 2026 should be budgeted without it. If you installed in 2025, claim it on your 2025 return with Form 5695.

Usasprayme
Discuss Your Insulation Needs
Reach out to discuss insulation for your property and learn about USA Spray Me’s spray foam and waterproofing solutions.

Sources

Get an Instant Quote From a Licensed California Insulation Contractor

USA Spray Me (CSLB Lic# 1058008) installs spray foam, blow-in, fiberglass and soundproofing insulation, foam roofing and protective coatings throughout the San Francisco Bay Area and within 100 miles of the city. Call (855) 566-5340 or request a free inspection below. Save $250 on orders over $2,500.

Free inspection · Written quote · No upsells

Let's Get You An Estimate

Tell us about your project and a licensed estimator will call you back, usually the same day. Save $250 on orders over $2,500.

  • Licensed, bonded & insured (CSLB Lic# 1058008)
  • Based in San Francisco since 2015
  • Serving every city within 100 miles of SF
  • Residential, commercial, industrial & agricultural

Call (855) 566-5340

Let's Get You An Estimate

Book your free on-site inspection. We reply within one business day, usually the same day.